Select an inverter from the drop-down menus Company and Model. Click the button for detailed information on the selected inverter. Alternatively, click the button to access the database. The desired inverter can also be selected there.
If the desired inverter does not exist in the database, you can create and use your own data records.
Specify number of inverters
Per used MPP tracker: Specify number of strings and number of modules per string
Manual
Using the selection list
Selection number of modules
The selection list only shows circuits that are within the design and tolerance range. Circuit tolerances can be edited under Options > Project options > Connection limits or by clicking on the Circuit limits link. For more information, see Connection limits.
(optional) Add more inverters
Existing connections or inverters can be added via the button .
Additional inverters can be added via the button .
Automatic Configuration
The existing module areas can be automatically interconnected using
Propose connection
Select connection
In both cases, the automatic interconnection depends on the Configuration limits.
The suggestions of the automatically generated circuits are made without Power optimizers.
Propose configuration
With the button
the selected module area is connected automatically. It is possible to select several module areas at once for connection. The suitable inverters are selected from the database via the on-hand selection link.
Propose configuration
Select configuration
If a selection of different, automatically calculated connections is desired, the dialog Calculate Inverter Connection can be opened via button
.
Calculate inverter configuration
To select an inverter connection, proceed as follows:
Use button
to select the inverters in question from the database
(optional) AdjustView and criteria
Here, settings for the display and information on the MPP trackers of the inverters can be made, according to which criteria the MPP trackers are to be connected.
(optional) Adjust connection limits
Start automatic connection via the button
Select the desired connection
More detailed wiring information can be obtained by pressing the button
button for detailed information on the selected inverter. Alternatively, click the 
button to access the database. The desired inverter can also be selected there.
.
.
to select the inverters in question from the database